6-Way Fuse Box Holder w/ LED Indicator 6 Circuit Blade Fuse Block Sticker Label For 12-32V Automotive Boat Car SUV Marine

Are you frustrated with replacing blown fuses? Here comes this Blade Fuse Block. Featured with LED warning indicator, protective cover and 5A, 10A 15A, 20A fuse, the fuse holder is made of PBT material, which is heat-resistant up to 185°F. And it is suitable for all vehicles with a 12-32 Volt DC power source. Widely used in vehicle, car, marine, bus, ship, tanker, subway etc.
*【LED Warning Indicator】- This fuse block with negative bus can easily identify and replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected. It is both safe and easy for you to check and replace the blown fuse.

*【Make Wiring Clean】- Instead of piling a mess of wires and fuse holders onto your battery posts, this fuse block/ground bus kit gives you dedicated fuses and ground locations to keep all of your wires clean, organized, and accessible.

*【Safe Material】- Made of environmental friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant up to 185°F. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon

*【Wide Usage】- This fuse block holder with ground is suitable for all vehicles with a 12-32 Volt DC power source. So it come with 70 stickers for DIY your specific needs, convenient for examination and repair, easy to troubleshoot in outdoor; widely used in vehicle, car, marine, bus, ship, tanker, subway etc.

*【Protective Cover & Fuse】- Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. With blade fuse 5A, 10A 15A, 20A.
Brand: iMounTEK
Product Type: Car Fuse Blocks
Color: Black
Material: PBT+PC
Terminal: Nickel-Plated Copper
Screw: Stainless Steel
Fuse Type: ATC or ATO
Main Wire: M5 Threaded Stud (100A 32V DC.max), Suitable Wire Diameter: #4-6 AWG
Single Wire: M4 Threaded Stud (30A 32V DC.max), Suitable Wire Diameter: #12-16 AWG
Working Voltage: DC 12V-32V
Load Current: Max. 30 Amp per circuit & 100 Amp per panel
Applicable to: Medium-Sized Blade Fuse
Working Temperature: -30℃~85℃/-22°F~185°F
6-Way Fuse Block Size: 8.8*8.5*3.65cm/3.46*3.35*1.44inch
6-Way Fuse Block Weight: 158.5g/0.35lbs
6-Way Fuse Block Package Size: 9*12.5*3.65cm/3.54*4.92*1.44inch
6-Way Fuse Block Package Weight: 217g/0.478lbs
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See www.P65Warnings.ca.gov.