Electric Dog Fence System Pet Tone Shock Boundary Containment Water Resistant Collar Receiver For Small Medium Large Dog

Our Petluv fencing system is a reliable, cost-efficient pet containment system. A buried wire transmits a harmless radio signal. When your dog approaches the boundary, the signal causes the dog’s collar receiver to deliver a warning beep first. If your dog continues closer to the boundary, the system will issue a mild shock. If your dog continues further, the system will issue stronger shocks until your dog returns to within the boundary you have set up. Your dog will naturally seek to avoid correction, and is content staying within established boundaries. Keep safe in limited space.
Safe Efficient Dog Fencing System: Come with buried wires and wall-mounted transmitter, help to train dogs to shape the habit of living in their own independent space, and keep your furniture and daily necessities clean and tidy, especially keep your pets away from the uneasy of living in a real fence. Make sure your dog stay in the specified and safe area, you will never have to worry about anything when you go outside. It can be widely used for dog training at home or field trip.

Automatic Dog Training: The collar works automatically once you install the system. It will send beep and shock as your dog try to cross the boundary wire. The closer your dog goes, the more intense the shock will be, effectively train him back to the play area you set.

Adjustable Control Range: The electric fence allows you to control the width of the boundary by adjusting the knob. Customizable range up to 1.2 acres/53189Square FT. The wire break warning can tell you in time if the wire is broken. The red low-battery indicator prompt you to replace the collar battery or it cause intermittent operation.

Multiple Dogs Support: Fits all kinds of dogs weighing 4lbs+ with neck sizes from 7.5in To 17.92in. One transmitter can pair with 3 collar receivers. Note: Our package only contains dual receiver collars.

Stable Mount: This do-it-yourself weekend project lets you create an in-ground fence designed to fit your yard. Suggestion: Use it only under the supervision of dog’ owner. Do not let the collar receiver over your pet for more than 12 hours a day.

Friendly Reminder: Please use short probes for short-haired dogs. Use long probes for long-haired dogs. As for fence, only when a dog runs at a relatively low speed and within the range of 0.5m/1.64ft, will the fence be activated. Otherwise,the fence will not work.

How It Works:

1) Wall-mounted transmitter: Transmitter is the central controller to whole electronic system. Make sure the wire is set to a loop.

2) The receiver collar: Receiver (collar) will make a warning beep firstly and then continuous stimulation if your dog attempts to approach wire boundary.

3) How to install the system

*Design your containment area and calculate the amount of wire needed.

*Install the wall transmitter.

*Lay out the perimeter wire.

*Connect the perimeter wire to the wall transmitter.

*Verify transmitter is functioning without problem.

*Set up the receiver and then, test the containment system and adjust the field width.

*Install the boundary wire and training flags.

*Fit collars to your dogs and train your dogs.

Note:

*Only use it for dog, not any other animals.

*Let your dog adapt to the collar before you start training. You should allow your dog to accept the collar as a part of her life.

*When the collar in your dog, do not set the program.

*Keep away from children can touch the place.

*Please read all instructions before using this product.

*The receiver can detect the signal emitted around 1m away from the boundary when the boundary range is adjusted to minimum. The receiver can detect the signal emitted around 2m away from the boundary when the boundary range is adjusted to maximum. If your dog is small, it’s recommended to apply small field width. If your dog is large, it’s recommended to apply bigger field width.
Brand: iMounTEK

Product Type: Electric Dog Fencing System

Materials: ABS

US Plug Of Remote: 100-240V

Collar Battery Type: 4LR44 6V

Runtime Per Battery: 10Days

Adjustable Control Range: Up To 5000 Square Meters/53189Square FT/1.2Acre

Pet Collar Fits Dogs 4lbs+ with Neck Sizes From 7.5in To 17.92in

Bury Wire Cable Length: 300m/984FT

Suggested Wire Bury Depth: More Than 1in Underground

Per Flag Size:8.5x19.5x0.5cm/3.34x7.68x0.2in

Charging Cable Length: 110cm/43.3in

Per Collar Strap Length: 45.5cm/17.92in

Transmitter Size: 14.3x9x5cm/5.63x3.55x1.97in

Transmitter Weight: 115g/0.26lbs

Per Collar Receiver Size: 6.5x3.5x3cm/2.56x1.38x1.19in

Per Collar Receiver w Strap Weight: 56.5g/0.12lbs

Package Size: 30*19*7cm/11.81*7.48*2.76in

Package Weight: 845g/1.86lbs

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See www.P65Warnings.ca.gov.